⚡
IMAXPWR · SUNLIGHT SERIES
MSP500HCG2
500kVA PV-Storage Hybrid On-Grid / Off-Grid All-in-One Cabinet
Integrated PCS · MPPT · EMS · PCM — one cabinet, one complete microgrid. 10ms seamless switch-over, 99.3% charging efficiency, IP54 protection for outdoor harsh environments.
Rated Power
500 kVA
Switch-Over
≤10 ms
Efficiency
＞99.3%
Protection
IP54
Parallel
3 Units Max
🔋
Battery Voltage
680–950 V DC
☀️
MPPT Channels
4 × 120 kW
🌡️
Temp. Range
-30 – +60 °C
🏗️
Technical Architecture
The MSP500HCG2 integrates PCS (Power Conversion System), MPPT (4 independent channels), EMS (Energy Management System), and PCM (Power Control Module) into a single rugged cabinet.
Built on a string-architecture with decentralized fault tolerance — each PCS module can be independently disconnected without affecting others. Battery clusters connect independently; no DC combiner box needed.
🎯
Application Positioning
Designed for commercial & industrial energy storage, microgrids, off-grid mining, island power systems, emergency backup, and renewable energy integration.
Supports PV + storage + diesel + grid multi-energy coupling with grid-forming capability — turns unreliable utility feeders or isolated power sources into stable, economical green microgrids.
Product Advantages
Engineered for performance, reliability, and intelligent energy management
🛡️
Safety & Reliability
IP54 protection, built-in lightning protection, AC distribution, and 10ms seamless switch-over protect critical loads from grid anomalies.
⚡
High Efficiency
Charging efficiency exceeds 99.3%. Intelligent EMS scheduling enables peak shaving, valley filling, self-consumption, and anti-reverse flow.
🧠
Intelligent Control
Real-time monitoring of PV, storage, load, and diesel energy flow. Cloud-based management, remote monitoring, fault diagnosis, and OTA updates.
🔧
Flexible Integration
Supports PV, storage, diesel, and grid inputs. String-architecture allows modular expansion. Up to 3 units in parallel for capacity scaling.
Technical Specifications
MSP500HCG2 — Sunlight 500
| Parameter |
Value |
Notes |
| System Parameters |
| Rated Power (Grid / Off-Grid) |
500 kVA |
— |
| Maximum Output Power |
550 kVA |
— |
| Grid / Off-Grid Switch-Over |
Active: 0 ms / Passive: <10 ms |
Seamless transfer |
| Max Parallel Units |
3 |
Flexible capacity expansion |
| EMS Functions |
SOC balancing, peak shaving, self-consumption, anti-reverse, diesel hybrid, cloud |
Multi-mode |
| Protection Grade |
IP54 |
Dust & water resistant |
| Operating Temperature |
-30 °C ~ +60 °C |
Wide temperature range |
| Altitude |
≤2000 m (derated to 4000 m) |
— |
| Battery Parameters |
| Highest Battery Voltage |
950 V DC |
— |
| Lowest Battery Voltage |
680 V DC |
— |
| Rated Battery Voltage Range |
680 – 950 V DC |
— |
| Maximum Battery Current |
200 A × 4 channels |
— |
| PV Parameters (MPPT) |
| PV Power / MPPT Channels |
120 kW × 4 channels |
4 independent MPPT |
| Highest PV Voltage |
950 V |
— |
| Lowest PV Voltage |
200 V |
— |
| Rated MPPT Voltage Range |
600 – 900 V |
— |
| Maximum Input Current |
200 A × 4 channels |
— |
| AC Side (Grid-Tied) |
| Rated Output Power |
500 kVA |
— |
| Rated Grid Voltage |
400 V / 230 V |
— |
| Rated Current |
724 A |
— |
| THDi (＞30% load) |
＜3% |
High power quality |
| Power Factor |
1.0 |
— |
* Specifications subject to change without notice. Data from IMAXPWR official product documentation.
Application Areas
Where the Sunlight Series delivers reliable power
🏭
Commercial & Industrial
Peak shaving, backup power
🏝️
Island Microgrids
Off-grid renewable integration
⛏️
Mining & Remote Sites
Diesel hybrid, emergency power
🚗
EV Charging Infrastructure
PV-storage-charging integration
🏗️
Construction & Field Ops
Temporary power, emergency backup
🌾
Agricultural & Remote
Irrigation, off-grid farms
Electrical Topology & Energy Flow
Multi-energy coupling · String-architecture · Grid-forming
☀️ PV Array
→
MPPT ×4
→
⚡ DC Bus
🔋 Battery Bank
↔
⚡ DC Bus
↔
PCS
↔
⚡ AC Bus
🛢️ Diesel Gen
↔
⚡ AC Bus
↔
🏭 Grid / Loads
🔵 Charging Mode: PV/Grid → DC Bus → Battery
🔴 Discharging Mode: Battery → PCS → AC Bus → Loads/Grid
🟡 Diesel Hybrid: Auto start/stop, grid-forming support
Protection & Safety
Comprehensive protection for personnel, equipment, and system integrity
⚡
Over Voltage Protection
AC/DC side protection
🔌
Over Current Protection
Short-circuit & overload
🌡️
Thermal Protection
Smart fan cooling, -30~60°C
🛡️
Short Circuit Protection
Fast fault isolation
🌩️
Lightning Protection
Built-in surge protection
📡
EMC Compliance
EN/IEC standards
IP54 Protection: Dust and water resistant enclosure, suitable for outdoor installation in deserts, coastal areas, and mining camps.
Maintenance & Service
Keeping your system running at peak performance
🔧
Routine Maintenance
- Visual inspection of enclosure & connections
- Air filter cleaning (fan-cooled units)
- Firmware & EMS parameter verification
- Battery health & SOC/SOH monitoring
🛠️
Troubleshooting
- Real-time fault logging & alarm history
- Remote diagnostic access via cloud
- Modular design — single module isolation
- Quick replacement of PCS modules
📞
Technical Support
- 24/7 remote monitoring & support
- On-site commissioning & training
- Customized O&M service agreements
- Warranty & extended service plans
Frequently Asked Questions
Quick answers to common questions about the MSP500HCG2
What energy sources does the MSP500HCG2 support?
It supports photovoltaic (PV), battery storage, diesel generator, and utility grid — four energy inputs for flexible multi-source coupling.
What is the grid/off-grid switch-over time? Will loads experience downtime?
Active switching is 0 ms; passive switching is <10 ms. This is a seamless transfer — critical loads do not experience interruption or restart.
Can multiple units be paralleled for higher capacity?
Yes, up to 3 units can be paralleled, offering flexible capacity expansion for larger power demands.
Is the cabinet suitable for outdoor installation?
Yes. With IP54 protection, dust and water resistance, fan cooling, and a -30°C to +60°C operating range, it is designed for outdoor use in harsh environments.
What EMS operation modes are available?
Supports SOC balancing, peak shaving, valley filling, self-consumption, surplus feed-in, anti-reverse flow, diesel hybrid, and cloud platform integration.
What is the maximum efficiency of the system?
Charging efficiency exceeds 99.3%, maximizing renewable energy utilization and reducing electricity costs.
Does IMAXPWR provide customized solutions?
Yes. IMAXPWR offers full customization — from system design and engineering to O&M services, tailored to specific project requirements.
What is the operating temperature range and altitude rating?
Operating temperature: -30°C to +60°C. Rated altitude: ≤2000 m (derated to 4000 m).
Related Products
Explore more IMAXPWR energy storage solutions
🔋
MSP250HCG2
250kVA Sunlight 250
⚡
MSP100HC
100kW Modular PCS
🔌
MSP110HS
110kW Liquid-Cooled PCS
🏗️
IX-PCS215-A2
215kW 1500V PCS
📦
BESS Cabinets
215kWh / 233kWh Systems
About IMAXPWR
ImaxPWR (Imax Power Technology Co., Ltd.) is a national high-tech enterprise specializing in new energy solutions. As an original equipment manufacturer, we provide integrated energy storage products and system solutions covering bidirectional PCS, DC/DC converters, energy management systems and energy storage cabinet integration.
Driven by technology innovation and quality control, ImaxPWR supports global customers in grid, microgrid, renewable energy and charging infrastructure applications with reliable and customized energy solutions.
📬 Contact Information
Company
Imax Power Technology Co., Ltd.
Shenzhen, China
© 2026 IMAXPWR (Imax Power Technology Co., Ltd.) — All rights reserved.
