Description
This power supply is a pulse power supply, designed for situations such as micro-arc oxidation that require pulse voltage and current. The power supply adopts a high-frequency isolation design and advanced DSP control, ensuring stable output voltage that does not change due to fluctuations in input voltage. The output frequency and duty cycle are adjustable.
■ Product Features:
- Input voltage range: 342VAC~418VAC
- DSP control, high precision in output current and voltage
- Modular structure, small size, and small footprint
- Maximum working efficiency: >93%
- Cooling method: Built-in fan, air intake at front and exhaust at rear, easy fan replacement
- Supports CAN bus/RS485 communication function
- Supports constant voltage and constant current modes, with free switching
- Supports input overvoltage/undervoltage protection, phase loss protection, and input three-phase imbalance protection
- Supports output overvoltage protection, overcurrent protection, short circuit protection, and overtemperature protection
- Independent air duct design, component isolation design, with three-proof (waterproof, dustproof, and anticorrosive) coating, resistant to alkali and acid
- Long lifespan and high reliability
■ Product Specification Parameters:
| Item | High-Frequency Digital Micro-Arc Oxidation Power Supply |
|---|---|
| Model | IPMA-800/500 |
| Input | |
| Voltage | AC 380V ±10% 50/60Hz |
| Input Method | Three-phase four-wire, no neutral wire |
| Control Method | DSP digital control PWM modulation |
| Power | 0~375KW |
| Start-up | Soft start |
| Voltage | Positive pulse DC 0~+750V (0~+750V is the conventional value for micro-arc oxidation. Due to different workpiece materials and sizes, the final production range needs to be selected based on experimental results) |
| Voltage/Current Stability | ≤1% F.S. Rms |
| Output | |
| Current | DC 0~500A (0~500A is the conventional value for micro-arc oxidation. Due to different workpiece materials and sizes, the final production range needs to be selected based on experimental results) Peak current 3000A |
| Load Variation Rate | ≤0.5% |
| Efficiency | ≥95% max |
| Frequency | 50~3000Hz continuously adjustable |
| Positive-Negative Ratio | 5~90% continuously adjustable |
| DC Output | (When positive-negative ratio is 100%) Can modulate pure DC output of corresponding specifications |
| Display | Input voltage, frequency, output positive voltage, positive current value, frequency, positive-negative ratio, module operating status, fault display |
| Working Duration | Can work for a long time under full load |
| Control | |
| External Control Port | Communication interface RS485/MODBUS |
| Working Mode | Constant voltage/constant current mode |
| Monitoring | |
| Voltage/Current | Constant voltage mode, constant current mode |
| Output Voltage | Touch screen display |
| Output Current | Touch screen display |
| Protection | Equipped with input overvoltage, input undervoltage, phase loss, overheating, overvoltage, overcurrent, short circuit, overload and other protection and alarm functions |
| Cooling | |
| Method | Air cooling |
| Air Inlet/Outlet Spacing | 80 cm |
| Ambient Temperature | -10~45°C |
| Humidity | 0~90% non-condensing |
| Protection Level | IP20 |
| Cooling | Forced air cooling |
